I'm using the key decryptor method to program evo-all CAN BUS module on a 2010 F150. Following the directions, I hold prog button, plug in data, release on solid red, then continue to plug in remaining connectors.
Once connected, I press prog once, the red LED turns off then on. Here's where it doesn't work correctly..
When I put key in ignition, and turn to run/on, the yellow LED turns on but the red does not turn off as stated in directions.
I do have the rx and tx wired as described in guide light blue/blk to violet/gray(rx) and light blue to orange/yellow(tx)
Firm: 71.47